CANON EOS R3

Canon EOS R3 Mirrorless Digital Camera Body

Designed for speed, versatility and reliability, the Canon EOS R3 combines the technology of its mirrorless EOS R system with the ruggedness and performance you would expect from a flagship DSLR. With a new full-frame stacked sensor, updated AF performance, and a refined body design, the EOS R3 is the first 3-series camera since the film age and sets up as a flexible, contemporary mirrorless camera. quick shot.
Among the most important technologies in the R3 is the 24.1 MP stacked sensor that offers really fast read speeds to help reduce rolling shutter distortion and benefit video recording and fast continuous shooting applications. This full-frame BSI CMOS sensor also benefits from an updated DIGIC X processor, which helps increase overall speed for continuous shooting at up to 30fps with an electronic shutter, raw 6K 60p and 4K 120p video recording, and Dual Pixel. Intelligent CMOS II. autofocus with Eye Control AF for intuitive focus point selection.
The R3 is also the first EOS camera in the R series to feature a built-in vertical grip, making it an ergonomic choice for long shooting times and for seamlessly switching between horizontal and vertical shooting orientations. The rugged body design also incorporates a 5.76m-dot high-resolution OLED EVF and 3.2 "vari-angle touchscreen LCD, along with two memory card slots, wired and wireless connectivity, and a multi-function shoe design. Updated for greater accessory compatibility.
Full-frame stacked sensor and DIGIC X processor
24.1MP BSI Stacked CMOS Sensor
A first for EOS cameras, the R3 features a stacked sensor design that promotes impressively fast read speeds that greatly reduce rolling shutter distortion and enable faster shooting performance. This 24.1MP full-frame CMOS chip also has a backlit design that is more efficient at capturing light, leading to reduced noise, greater clarity, and smoother color reproduction, particularly when working in conditions. low light.
DIGIC X processor
An updated DIGIC X complements the new sensor design with capable processing and the ability to perform simultaneous high-speed tasks such as high-speed shooting at 30fps while taking AF and AE readings before each frame. The processor also helps achieve a wide sensitivity range of ISO 100-102400, which can be expanded to ISO 50-204800, to work in a wide variety of lighting conditions.
electronic shutter
A primary benefit of the stacked sensor design is a highly usable electronic shutter function that can shoot continuously at up to 30 fps, for up to 150 raw frames, with virtually no rolling shutter distortion. When working in manual or shutter-priority mode, the maximum shutter speed is 1/64000 second and flash sync is possible even with an electronic shutter, up to 1/180 second. This versatile shutter function is inherently quiet, but can be combined with a selection of audible shutter noises to accompany each shutter click to make it easier for subjects to recognize when a photo has been taken.

A manual shutter is also available, offering a maximum continuous shooting speed of 12fps, with a buffer of over 1000 frames, along with a maximum flash sync speed of 1/250 sec.
6K Raw and DCI / UHD 4K video recording
Also contributing to remarkable video performance, the 24MP full-frame sensor offers high-resolution 6K raw 12-bit internal recording and 4K 120p 10-bit recording without cropping with Canon Log 3. The 6K and 5.6K can also be used for oversampling DCI and UHD 4K shooting with improved sharpness, reduced moiré, and lower noise. HDR-PQ recording is also possible for in-camera HDR production and external recording, via the HDMI port it supports clean 4K output at up to 60fps. All-I, IPB, and IPB Light compression options are available, along with the ability to use Dual Pixel CMOS AF II when shooting up to 6K raw. Unlimited recording times are also possible, and the R3 features microphone and headphone ports, as well as a micro-HDMI Type-D port for clean output to an external recorder.
Autofocus and image stabilization
Dual Pixel AF II CMOS
An enhanced Dual Pixel CMOS AF II system features 1,053 automatic AF points, covering the entire 

sensor area, for faster, more sensitive and more accurate focusing performance. This enhanced phase detection focusing system has also improved subject detection and tracking, with the ability to intelligently recognize eyes, faces, heads (including helmets), animals, and vehicles, and the tracking will automatically fix to these subjects and will maintain sharp focus during burst shooting. . The Dual Pixel AF II's low luminance limit has also been improved to focus down to an impressive -7.5 EV for precise focus even in night conditions.
Eye control AF
New to EOS digital cameras, Canon is reintroducing Eye Control AF with the R3. This popular feature from the film age has now been refined and fine-tuned to work alongside the intelligent focus capabilities of Dual Pixel CMOS AF. Eye Control AF essentially allows shooters to use their eye to initiate where the focus point is by simply looking through the electronic viewfinder, and then the camera will take control using subject tracking and detection to keep the sighted subject in focus. sharp.
Image stabilizer with sensor shift
An In-Body Image Stabilizer (IBIS) corrects for unwanted camera shake when shooting handheld, helping handheld shooting in low-light conditions and reducing shake when shooting video. This 5-axis system can also be used in conjunction with lenses with optical image stabilization to compensate for up to 8 stops of camera shake, depending on the specific lens used.
Body design
5.76m-Dot EVF and Vari-Angle Touchscreen LCD
An impressive 5.76m-dot OLED electronic viewfinder is featured for clear, high-resolution viewing at eye level. This 0.76x magnification finder also benefits from the stacked sensor design, and allows for blackout-free viewing when working with an electronic shutter and supports a 120fps refresh rate for realistic motion rendering. The large viewfinder area also allows extensive shooting information to be displayed, if desired, and the information display rotates with the camera for more natural viewing.

In addition to the EVF, a 3.2 "vari-angle LCD screen is also available that benefits working at high, low and front-facing angles. The flexible positioning is complemented by a touch screen interface and the impressive 4.15m-dot resolution. enables vivid playback and live view monitoring.
Professional grade body construction
Following the flagship designs of DSLRs, the R3 has a robust and ergonomic body design that adjusts with an integrated vertical grip for increased comfort when working in horizontal or vertical shooting orientations. The R3 features both the smart controller and multiple controller from earlier EOS cameras, making for an intuitive driving experience, and has a rear design similar to the 1D X Mark III and R5 bodies. This larger body design also makes room for the high-capacity LP-E19 battery for extended recording sessions and is built to the same weather-sealing specifications as the flagship EOS-1D X Mark III.
Dual memory card slots
The EOS R3 has two memory card slots (one CFexpress Type B slot and one UHS-II SD slot) for file storage flexibility. The CFexpress Type B slot should take priority for 6K video recording and fast continuous shooting and the SD slot is a convenient alternative for backup or less critical speed shooting.
Connectivity
Extensive wired and wireless connectivity options are available, allowing multiple methods of transferring photos, videos, and voice memo data. Physically, the camera features a 1000BASE-T Ethernet interface and an RJ-45 port for a fast and secure wired connection. When transferring wirelessly, 5 GHz Wi-Fi and Bluetooth are available for transferring and remote control of the camera. Users of certain smartphones can also make use of their device's mobile data to share files directly from the camera over 5G networks when the device is connected to the R3 via USB.

There is also a built-in GPS module, which is GLONASS and QZSS compliant, for in-camera location tagging to help expedite any geotagging and timestamping needs.
Next-generation multifunction shoe
An upgrade from a conventional shoe, the multi-function shoe adds a row of pins to the front of the design to allow for additional mincreased accessory functionality, as well as to provide power to select accessory types that traditionally rely on separate batteries. This upgraded shoe is compatible with select accessories, including the ST-E10 Speedlite Transmitter, DM-E1D Stereo Microphone and AD-P1 Smartphone Link Adapter, as well as the AD-E1 Multi-Function Shoe Adapter for compatibility with the inherited shoe. mounted accessories.