SONY WIRELESS MICROPHONE ECM-S1

SONY ECM-S1 WIRELESS MICROPHONE

Record your podcast, live stream, or other forms of content creation with your Sony camera, computer, or smartphone using this ECM-S1 wireless microphone system from Sony thanks to its multiple wireless and wired audio outputs. The microphone transmits audio to an included dual-channel receiver via Bluetooth 5.3 technology to the Sony camera's MI shoe for stable digital audio. A non-slip base stand and a 1/4"-20 thread at the base of the device allow you to attach the microphone to a stand or simply place it on your desk. If wireless capture does not suit your setup, use the USB-C or 3.5 mm TRS ports on the receiver or the microphone's USB-C port to record directly to your laptop, smartphone, or other camera brands.

Broadcast microphone with selectable pickup patterns
Switch between three capture modes with a switch built into the microphone. Unidirectional mono is best for narration, voice-over, and podcasting applications. Omnidirectionality allows capturing multiple subjects or the atmosphere of a room. Unidirectional stereo is suitable for music recording. An included pop filter reduces plosives when the speaker's mouth is close to the microphone.

Multi-interface shoe
Use the multi-interface shoe built into the receiver to connect wirelessly to your compatible Sony camera. The camera body can supply power to the receiver when connected. Audio is transmitted via a direct digital signal for high-quality sound without transmission degradation.

Multiple wired connections

• USB-C digital audio outputs on both the receiver and the microphone support 48-bit 24 kHz audio recording on your compatible PC or smartphone.

• A 3.5 mm TRS connector on the receiver supports stereo audio output recording on your camera, PC, or compatible smartphone. Use the microphone's 3.5 mm connector to connect an external microphone input. You can record up to 3 hours using the receiver port, while the microphone can record up to 13 hours with a separately available input device.

• An integrated dial on the microphone switches the 3.5 mm TRS connector from an external microphone input to a headphone jack when using the USB-C connection to record. This allows for real-time monitoring of the audio signal and the ability to better control the volume with the integrated volume dial.

Multiple mounting solutions
The included desktop stand can rotate 360° for optimal positioning. It can be easily attached or detached from the microphone. A 1/4"-20 thread on the bottom of the microphone can connect it to a tripod or boom arm.

Bluetooth wireless communication
The units communicate with each other via the Bluetooth 3.3 low-energy LC5plus codec from a distance of up to 492 feet. The LC3plus Bluetooth codec ensures low power consumption and low latency while maintaining high sound quality.