AVANT-GARDE HIGH GH-300T KNEECAP WITH AGGARE PISTOL

Vanguard's ALTA GH-300T Pistol Grip ball head is designed for action photography. By squeezing the ergonomic handle, you release the ball grip, and you can position the camera angle. Once you release the handle, it automatically locks into place.

The magnesium ball head has two pan axes, which are located at the base of the head and the other just below the quick-release plate. The pan base, with its separate pan lock, rotates 360° and moves freely to follow a fast-paced subject. The second base has 72 click points with 5° intervals, allowing a camera to create panoramic pictures. In addition, the ball has a side tilt of -32 to 90° and a front tilt of -8 to 90°.

The pistol grip can also rotate 360° vertically to 8 preset positions. of course, this is to make the grip position comfortable during shooting, and with a load capacity of 17.6 lb and its tension control, you can be sure that the camera will not move or move anywhere. in addition, the Ark type head is compatible with most Ark type plates on the market, and a safety pin located inside the clamp prevents the plate from accidentally dropping if the clamp was partially attached. of course, this is to make the grip position comfortable during shooting, and with a load capacity of 17.6 lb and its tension control, you can be sure that the camera will not move or move anywhere. in addition, the Ark type head is compatible with most Ark plates on the market, and a safety pin located inside the clamp prevents the plate from accidentally dropping if the clamp was partially attached.