16 other products in the same category:
Light support for Panelite
Allows the Panelite to stay in one position
Compact and easy to transport
Compatible with Panelite reflectors with a diameter of 95-180 cm
Double Pivot and Endless Adjustment Extension Use with 2 cameras (one forward and one backward) for filming Simultaneously in two directions Add a video and capture light at night or in the dark Wing nut style knobs...
Adjustable arm for use as different types of accessories
With a maximum payload of 10 Kg, there are not many accessories that this arm cannot hold
The folded size is 9 cm
The weight is 226 g and it is suitable for...
The upper part of the handle has a standard male connector, which allows the Lastolite Ezybox shoe, rocker shoe, rocker spigot, TriFlash mount and TriGrip mount, as well as other accessories to be attached.
The...
MOUNT UP TO 2 PAVOTUBES: A simple and effective grip solution for mounting up to 2 PavoTube LED tube lights on a single light stand.
GET LIGHT WHERE YOU NEED IT - With a gooseneck and swivel ball joint, the Double...
The Convi clamp is more than an incredible clamp; it is the foundation of an entire gripping system. The all-metal Convi clamp is made from a lightweight alloy that supports loads of up to 20 kg.
Original Nanlite adapter that allows gripping and using V-Mount batteries with the Nanlite Forza 150.
Supports 14.4 - 14.8 V V-Mount batteries.
It's an adjustable arm that allows you to place a camera, lighting fixture or accessory in any position in a matter of seconds! The Max arm is equipped with special friction discs replaceable by the user, with...
The vertical camera mount allows for reliable vertical shooting with the DJI RS 2 for longer periods. It replaces the original camera mounting plate with the vertical mount and balances the camera.
Package...
Support for ceiling mounting of the rail section of a Bogen rail system.
It is advisable to pre-assemble these brackets on the rails at ground level to ensure proper alignment before screwing into the ceiling.
Fits any tripod with a 1/4" or 3/8" threaded hole.
Compatible with any accessory with a 1/4" threaded hole.
With a size of 113mm.
Extends up to 180mm.
Weighs 217g.
Maximum load capacity of 3kg.
Single oversized...
For DJI Osmo Action 3 and Action 4
Four extendable sections
Height range from 5.5 to 16.9"
Built-in tripod
Quick release ball head design
Leofoto UL-02 Ring for Sony cameras and lenses and compatibles. Made from aerospace aluminum, it allows you to set the frame either vertically or horizontally without needing to remove the camera from the tripod.
Compact, easy to grip, and adjustable from 0.3 to 1.5 meters, this extendable arm allows for taking selfies and other shots at creative angles effortlessly. The 1/4" threaded hole at the bottom allows for installing...
https://dev.dukefotografia.com/en/supports-arms/insta360-soporte-para-la-dash-cam-one-rsr-x2.html
15591
INSTA360 SOPORTE PARA LA DASH CAM ONE RS,R X2
<ul><li><strong>Quick Setup and Release</strong></li>
<li><strong>The 1/4" mounting point is easily changed, allowing you to mount it directly on other accessories.</strong></li>
<li><strong>Designed for the Insta360 ONE series</strong></li>
<li><strong>Easily get dashboard camera shots, then quickly release the mounting point and mount it with other accessories</strong></li>
<li><strong>Durable 3M adhesive</strong></li>
<li><strong>Compatibility: ONE RS, ONE X2, ONE R, ONE X</strong></li>
</ul>
https://dev.dukefotografia.com/62610-home_default/insta360-soporte-para-la-dash-cam-one-rsr-x2.jpg
57.48
instock
57.48
57.48
0
0
2021-05-01T00:00:00+0200
/Video
/Supports - Arms
/Video/Action Chambers
English
Español
Français
Deutsch
Italiano
Português