CANON ZOEMINI S 2 INSTANT CAMERA AND PRINTER - PEARL WHITE

Print Technology: ZINK
Printer head life: 1000 pages (less than 25 ° C)
Print speed: Approximately 50 seconds (starting and stopping the motor with an ambient temperature of 25 ° C)
Print resolution: 314 x 600 dpi
Borderless printing: Yes
White border printing: Yes
Filter printing: Yes (black and white / vivid color)
Border customization: Yes (via Mini Print app)
Printer connection: Micro USB
Connectivity: Bluetooth 5.0
NFC: iOS (needs a third-party NFC reader, only available for iPhone 7 or later versions); Android (works on NFC compatible models and with a preloaded NFC reader)
Automatic paper sensor: Yes
Battery: Internal rechargeable lithium polymer battery, 700 mAh
Battery life: Average of 25 prints on photo paper
Auto power off: Yes (3 min / 5 min / 10 min) (Settings in the app)
Reset button: Yes
Charging speed: Approximately 120 minutes (from 0% to fully charged)
Control panel: 1. Power button; 2. Fire button; 3. Filter button (black and white / vivid color); 4. Border button (white border / custom border); 5. Slide switch (landscape without flash / portrait with auto flash / selfie with ring light)
Memory card compatibility: YES, MicroSD card, up to 256GB
Supported Media Type: Canon ZINK Photo Paper, Canon ZINK Pre-Cut Adhesive
Maximum paper size: 5 x 7.6cm
Paper capacity: Up to 10 sheets of Canon ZINK® photo paper + 1 SmartSheet
Body Colors: Rose Gold / Pearl White / Dark Turquoise Blue
Size (W x H x D): 121 x 80.3 x 22.4mm
Weight: 188g
Recommended operating, charging and storage temperature (?): 15 - 32 ° C
Recommended Operating Humidity (RH): 40-55% RH
Operating temperature (?): 5 - 40 ° C
Operating humidity (RH): <70% RH
Cameras
Single photo resolution: 8 MP
Image format: JPG
Flash light: Yes
Flash light range: 0.5M - 1.0M
Ring light: YES (8 LEDs)
Ring light effective range: 0.3M - 0.6M
Focus range: Fixed (range: 30 cm ??)
Focal length: 2.6mm
Focal length (35mm film equivalent): 25.66mm
Zoom: Fixed
Opening: Opening
Sensitivity: Automatic (ISO range: 100 - 1600)
White balance: Automatic
Exposure adjustment: Automatic
Live view: YES (in APP)
Self-timer: Yes (Off / 3 seconds / 5 seconds / 10 seconds) (In-app settings)
Remote trigger: YES (on APP)
Custom Camera Sound Indication: YES (On / Off / Shutter) (In-App Settings)
Indicators
Lower LED (charging): Red: charging; Green: full charge
Top LED (status):
Solid white - device is on and standby
Blinking white: processing Smartsheet / preparing to print / updating firmware
Solid red: device temperature is too high
Flashing red: cover open / printer error / paper out / paper jam Red / white loop: low battery, very low battery
Flashing white: device is starting up
Flashing blue: Smartsheet error
Solid Cyan - Device temperature is too low
Flashing cyan - the printer head is cooling down
Solid Magenta - Mass Storage Mode
Flashing Magenta - SD card error
Yellow / Magenta / Cyan / White Loop - Printer is printing
Filter selection LED:
1) Power off: no
2) On: black and white filter
3) On: vivid color filter
White edge LED: On: yes; Off: no
Speaker (status)
1) Power on
2) Camera focus lock
3) Camera shutter
4) Camera error (error when taking the photo)
5) Insert / eject the microSD card
6) microSD card error