BENRO VIDEO ALUMINUM TRIPOD A373FBS8PRO

Benro A373F Single Tube Aluminum Tripod with S8Pro Fluid Video Head

Benro's A373F Single Tube Aluminum Tripod features a 75mm bowl and includes a 75mm half ball adapter. It is paired with the S8Pro Fluid Video Head, which has a 75mm flat base that connects directly to the half ball adapter. The head supports loads of up to 7.98 kg, and thanks to the flat base design with a 3/8 "-16 thread underneath, the head can be moved from the tripod directly to sliders, jibs and other support equipment. The versatile system has a compact design with 2-stage / 3-section single tube legs and spiked and rubber feet for use on virtually all surfaces. Each tripod leg can be independently adjusted to three positions, allowing you to set quickly and efficiently.
The S8Pro head offers 7 + 0 steps of counterweight and continuous pan and tilt drag. There are also independent twist and tilt locks. The tilt range is wide + 90 / -75 °, and the swivel range is full 360 °. With the head attached, the tripod reaches a maximum height of 162.56 cm. The minimum height is 32.51 cm, which is a low height that is not very common among most tripods. At this height, you can set up the tripod for low-angle shots.
Some parts of the head are made of magnesium and other parts of aluminum. Virtually the entire head, including its knobs, is made of sturdy yet lightweight metal. A panoramic bar is included that can be attached to a rosette adapter on the left or right side of the head, for left or right handed users. A camera plate is included that can be adjusted forward / backward to allow you to find the optimal balance for your camera. A safety lock on the plate ensures that, once mounted, the plate will not come off if you move it too far in either direction. Two camera screws, 1/4 "-20 and 3/8" -16, are supplied and can be stored under the camera plate on the head, in dedicated slots. For attaching accessories, there is a 3/8 "-16 threaded hole on each side of the head where you can secure the link arms.